Block paving, driveway paving, cobblestones, garden paving.

Block paving or as its often referred to as brick paving is one of the most common types of surfacing for a driveway, patio or garden. Made of concrete or clay, depending on the type of paving, they are individually laid in a variety of patterns that lock them together to create the term interlocking paving.


Block Paving

Laid in a variety of styles with a wide variety of colour options available.

Tegula Paving

Laid most commonly using 3 different sizes, most common colours are available.

Permeable

Permeable paving is used for areas that comes under heavy floods of water.

Garden Paving

Decorative garden paving is used mostly on patios, gardens and pathways.


Installing Paving

Card image cap
Card image cap

Block Paving Information


Paving blocks come in many styles and can be laid in many different variations. Available in endless variety and possible design options when it comes to choosing the color, outlook and design layout of their new driveway, patio or paths.

Here is a quick breakdown on how block paving is laid on a driveway or patio area to provide an insight into the methodical approach required laying paving.

Preparing The Area

All our paving is laid on a firm, level and well drained base to ensure long term service and stability – getting the ground work right is essential. Vegetation and top soil is removed to an approximate depth of 200mm-250mm across the area to be paved. We mark out this area with pegs or retaining boards and adjust their height to the required finished surface levels, ensuring that we allow a fall of 1:80 away from any buildings and walls for surface drainage.

We also make sure that the finished paving surface level is at least 150mm (two brick courses) below the level of any damp proof course. After excavation, we rake level to ensure an even depth and compact the whole area using a plate compactor.

Edging and Kerbing

The next stage is to set up edge restraints around the area to be paved (these may include existing walls) using block kerbs or concrete edging. The kerbs or concrete edgings are bedded into 100mm of concrete, to the required level, with a 45 degree haunch up the side of at least half the block or kerb height.

This is essential to prevent the blocks and the sand on which they are laid from moving. Underground drainage, aco drains or similar drainage including inspection chambers are installed at this stage if required. The area is then to be back filled with 150mm of crushed stone, compacted to 100mm.

Base Foundation

Onto this, a layer of slightly damp grit sand (grit sand is more free draining than normal sand and is less prone to being washed out) is applied, to the depth of 50mm, and then compacted with a plate compactor. A second layer of grit sand is then applied, to a depth of 20mm. This second layer of sand is levelled to the correct falls.

Laying – the block paving

The laying of concrete block paving should always begin from the bottom of any slope, preferably starting from a right angle or a straight edge. Working from several packs at a time is essential when using a mixed size product such as cobble styled paving blocks. We place the blocks on top of the laying course, ensuring they are around 4-5mm above the desired finished level. Once all full blocks are laid, we use a mechanical block splitter or a Con-saw to cut the blocks required for the infill pieces or at the retaining edges.

Once completed, we sweep the area and compact with two or three passes of the plate compactor. Jointing of the block paving is preferably completed in dry periods. We apply kiln dried sand to the block paved area, then brush into the joints using a soft brush, ensuring the joints are filled fully.

We use the plate compactor on the paved area again, to push the sand into the joints. Once this has been done, we check for any gaps in the jointing and fill where necessary, compacting again afterwards if needed. The sand in the joints may need to be topped up for the first few months after the job is completed.


HERRINGBONE

Tegula One Sized Paving

Basketweave Pattern

COBBLESTONE

Cobblestone Swirls

Stretcher Bond



Contact Us

Excel Driveways
Grange Hill, Douglas
County Cork, Ireland
P: 021 202 1046

Terms

Paving Contractors, Block Paving, Driveways, Paving Contractor, Block Paving Contractors, Driveway Contractors, Paving, Block Paving Installers, New Driveways, Garden Paving, Cobblelock Paving, Driveway Paving, Pavers